MIL-PRF-1/22J
NOTES:
1.
Metric equivalents (to the nearest 0.01 mm) are given for general information only and are
based upon 1 inch = 25.4 mm.
2.
Tubulation shall lie within a circle 0.38 (9.65mm) diameter maximum located from centerlines
of flange. Qualification inspection required.
3.
Entire tube shall be plated 100 MSI minimum silver, or equivalent. Qualification inspection
required.
4.
Centerlines of window shall coincide with corresponding centerlines of tube body within .015
(.38) measured in plane of window. Conformance inspection, part 2, required.
5.
Two gaskets as specified on Drawing 191-JAN shall be supplied unmounted.
Conformance inspection, part 2 required.
6.
Dimension K shall be measured .12 (3.05 mm) from reference plane A.
7.
Dimension L shall be measured .12 (3.05 mm) from window plane.
8.
Reference plane A shall be normal to reference plane B.
9.
Flat end plate and dimpled window optional.
10. Seal-off cap
11. Position of gasket when mounted.
FIGURE 1. Outline drawing of electron tube types 1B35A , 1B37A, 6162 and 5864. -Continued.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business