MIL-PRF-1/1733A(NAVY)
c.
The axis of the RF anode terminal contact surface is coincident with the axis of the grid(1) terminal contact
surface, within 0.050 inch (1.27 mm).
d.
The axis of the anode and coolant connection is coincident with the axis of the RF anode terminal contact surface,
within 0.025 inch (0.64 mm).
16. Unless otherwise specified, the acceptance level for all tests listed under conformance inspection, part 1, shall be 1.0, inspection
level II.
17. The outside diameter of this ceramic bushing shall not enter the annular region defined by a circle of 3.880 inch (98.55 mm)
diameter concentric with diameter S of the RF grid(1) terminal.
18. Measurement of this dimension shall be made on both input and output ends.
19. The centers of the water course holes, in each connection around the periphery of the tube, shall be on a line through the center
of these holes and perpendicular to a line through the center of the tube within H2 degrees.
FIGURE 1. Outline drawing of electron tube type 8932 - Continued.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business