MIL-PRF-1/1605C
TABLE I. Testing and inspection.
15/ Power input to the TUT during life test shall be cycled according to the following schedule:
High voltage on:
7.5 hours.
High voltage off:
0.5 hours.
The rf input frequency shall be varied from F1 to F2 to F3 and repeated in intervals of 100 hours.
16/ Life test required for first article testing only.
17/ W ater shall be used with (1) specific resistivity maintained greater than 0.5 MegΩ-cm (2) oxygen content maintained
less than 0.5 ppm, and (3) a 3 to 4 micron filter.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business