MIL-DTL-75K
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements of documents cited
in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract (see 6.2).
FEDERAL SPECIFICATIONS
NN-P-71
-
Pallets, Material Handling, Wood, Stringer Construction, 2-Way and 4-Way
(Partial).
PPP-B-566
-
Boxes, Folding, Paperboard.
PPP-B-676
-
Boxes, Setup.
COMMERCIAL ITEM DESCRIPTION
A-A-3174
-
Polyolefin Plastic Sheet.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-1
-
Electron Tubes, General Specification For.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-129
-
Military Marking for Shipment and Storage.
MIL-STD-202
-
Electronic and Electrical Component Parts.
MIL-STD-2073-1
-
DoD Standard Practice for Military Packaging.
(Document copies are available on line at https://assist.daps.dla.mil/quicksearch or from Defense
Automation and Production Service, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract (see 6.2).
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ISO 10012-1
-
Quality Assurance Requirements for Measuring Equipment - Part 1:
Metrological Confirmation System for Measuring Equipment.
(Copies of these documents are available on line at https://www.ansi.org or from the American National
Standards Institute (ANSI), 25 West 43rd Street, 4 Floor, New York, NY 10036.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business