MIL-PRF-1/1424C
Limits
Ltr
Acceptance
Inches
Millimeters
Level (see 6/)
Min
Max
Min
Max
First Article Inspection
D
---
.969
1.031
24.61
26.19
E
---
.559 dia
.573 dia
14.20 dia
14.55 dia
F
---
.594
.656
15.09
16.66
G
Base: A4-18 (see note 2)
---
---
---
---
Conformance Inspection, part 2
A
6.5
9.250
9.750
234.95
247.65
B
6.5
---
3.625 dia
---
92.08 dia
C
6.5
8.472
9.032
215.19
229.41
NOTES
1. All dimensions in inches, with millimeter equivalents based upon 1.00 inch = 25.4 mm.
2. For pin alignment use gag GA4-7 or equivalent.
FIGURE 1. Outline drawing of tube type 6303A - Continued.
NOTES
Referenced documents. In addition to MIL-PRF-1, this specification sheet sheet references MIL-STD-1311.
Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the
previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any
inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire
content irrespective of the marginal notations and relationship to the previous issue.
Custodians:
Preparing activity:
Navy - EC
DLA - CC
DLA - CC
Review activities:
(Project 5960-3741)
Navy - AS, CG, MC, OS
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and
responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at
www.dodssp.daps.mil.
4