MIL-PRF-1/311L
NOTES:
1. Accelerator power input (average) should be limited to 6 watts.
2. The deflection electrode circuit resistance should be approximately equal. Higher resistance values up to 5.0 Megohms
may be used for low-beam current operation.
3. This tube shall be designed for optimum performance when operating at an Eb3/Eb2 ratio of 2.0. Operation at
other ratios of Eb3/Eb2 may result in changes in deflection uniformity and pattern distortion.
4. This test to be performed at the conclusion of the holding period.
5. This specification sheet uses accept on zero defect sampling in accordance with MIL-PRF-1, table III.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business